Edimax 3G-6200N

Edimax 3G-6200N

Hallo,

ich hab mir den 3G Router von Edimax zugelegt in der Hoffnung das so alle Rechner vom Surf Stick profitieren ohne Ad-Hoc Netzwerke etc..

folgendes Problem tritt aber beim Verbinden auf (APN, Benutzername und Passwort funktionieren als DFÜ Verbindung auf dem PC tadellos)

der Router hat einen mitgelieferten Verbindungsmanager der folgenden Code produziert:

Jan 1 00:00:00 (none) syslog.info syslogd started: BusyBox v1.11.1
Jan 1 00:01:03 (none) local2.notice pppd[1291]: pppd 2.4.4 started by root, uid 0
Jan 1 00:01:04 (none) local2.info chat[1294]: abort on (BUSY)
Jan 1 00:01:04 (none) local2.info chat[1294]: abort on (NO CARRIER)
Jan 1 00:01:04 (none) local2.info chat[1294]: abort on (ERROR)
Jan 1 00:01:04 (none) local2.info chat[1294]: report (CONNECT)
Jan 1 00:01:04 (none) local2.info chat[1294]: timeout set to 10 seconds
Jan 1 00:01:04 (none) local2.info chat[1294]: send (ATZ^M)
Jan 1 00:01:04 (none) local2.info chat[1294]: expect (OK)
Jan 1 00:01:04 (none) local2.info chat[1294]: ATZ^M^M
Jan 1 00:01:04 (none) local2.info chat[1294]: OK
Jan 1 00:01:04 (none) local2.info chat[1294]: -- got it
Jan 1 00:01:04 (none) local2.info chat[1294]: send (ATE1^M)
Jan 1 00:01:04 (none) local2.info chat[1294]: expect (OK)
Jan 1 00:01:04 (none) local2.info chat[1294]: ^M
Jan 1 00:01:04 (none) local2.info chat[1294]: ATE1^M^M
Jan 1 00:01:04 (none) local2.info chat[1294]: OK
Jan 1 00:01:04 (none) local2.info chat[1294]: -- got it
Jan 1 00:01:04 (none) local2.info chat[1294]: send (AT+CGDCONT=1,"IP","internet.t-mobile","",0,0^M)
Jan 1 00:01:05 (none) local2.info chat[1294]: timeout set to 30 seconds
Jan 1 00:01:05 (none) local2.info chat[1294]: expect (OK)
Jan 1 00:01:05 (none) local2.info chat[1294]: ^M
Jan 1 00:01:05 (none) local2.info chat[1294]: AT+CGDCONT=1,"IP","internet.t-mobile","",0,0^M^M
Jan 1 00:01:05 (none) local2.info chat[1294]: OK
Jan 1 00:01:05 (none) local2.info chat[1294]: -- got it
Jan 1 00:01:05 (none) local2.info chat[1294]: send (ATD*99#^M)
Jan 1 00:01:05 (none) local2.info chat[1294]: expect (CONNECT)
Jan 1 00:01:05 (none) local2.info chat[1294]: ^M
Jan 1 00:01:05 (none) local2.info chat[1294]: ATD*99#^M^M
Jan 1 00:01:05 (none) local2.info chat[1294]: CONNECT
Jan 1 00:01:05 (none) local2.info chat[1294]: -- got it
Jan 1 00:01:05 (none) local2.info chat[1294]: send ( ^M)
Jan 1 00:01:05 (none) local2.info pppd[1291]: Serial connection established.
Jan 1 00:01:05 (none) local2.debug pppd[1291]: using channel 1
Jan 1 00:01:05 (none) local2.info pppd[1291]: Using interface ppp4
Jan 1 00:01:05 (none) local2.notice pppd[1291]: Connect: ppp4 <--> /dev/ttyUSB0
Jan 1 00:01:06 (none) local2.debug pppd[1291]: sent [LCP ConfReq id=0x1 <mru 1458> <asyncmap 0x0> <magic 0xd9d91676> <pcomp> <accomp>]
Jan 1 00:01:06 (none) local2.debug pppd[1291]: rcvd [LCP ConfReq id=0x4 <asyncmap 0x0> <auth chap MD5> <magic 0xfc28f9> <pcomp> <accomp>]
Jan 1 00:01:06 (none) local2.debug pppd[1291]: lcp_reqci: returning CONFACK.
Jan 1 00:01:06 (none) local2.debug pppd[1291]: sent [LCP ConfAck id=0x4 <asyncmap 0x0> <auth chap MD5> <magic 0xfc28f9> <pcomp> <accomp>]
Jan 1 00:01:06 (none) local2.debug pppd[1291]: rcvd [LCP ConfAck id=0x1 <mru 1458> <asyncmap 0x0> <magic 0xd9d91676> <pcomp> <accomp>]
Jan 1 00:01:06 (none) local2.debug pppd[1291]: sent [LCP EchoReq id=0x0 magic=0xd9d91676]
Jan 1 00:01:06 (none) local2.debug pppd[1291]: rcvd [LCP DiscReq id=0x5 magic=0xfc28f9]
Jan 1 00:01:06 (none) local2.debug pppd[1291]: rcvd [CHAP Challenge id=0x1 <cc85b3674449153ba82d7df2f6ec40f8>, name = "UMTS_CHAP_SRVR"]
Jan 1 00:01:06 (none) local2.debug pppd[1291]: sent [CHAP Response id=0x1 <c70968437fc4402ec5f8dec01a31dc76>, name = "t-mobile"]
Jan 1 00:01:06 (none) local2.debug pppd[1291]: rcvd [LCP EchoRep id=0x0 magic=0xfc28f9 d9 d9 16 76]
Jan 1 00:01:06 (none) local2.debug pppd[1291]: rcvd [CHAP Success id=0x1 ""]
Jan 1 00:01:06 (none) local2.info pppd[1291]: CHAP authentication succeeded
Jan 1 00:01:06 (none) local2.notice pppd[1291]: CHAP authentication succeeded
Jan 1 00:01:06 (none) local2.warn pppd[1291]: kernel does not support PPP filtering
Jan 1 00:01:06 (none) local2.debug pppd[1291]: sent [CCP ConfReq id=0x1 <bsd v1 15>]
Jan 1 00:01:06 (none) local2.debug pppd[1291]: sent [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
Jan 1 00:01:06 (none) local2.debug pppd[1291]: rcvd [LCP ProtRej id=0x6 80 fd 01 01 00 07 15 03 2f]
Jan 1 00:01:06 (none) local2.debug pppd[1291]: Protocol-Reject for 'Compression Control Protocol' (0x80fd) received
Jan 1 00:01:07 (none) local2.debug pppd[1291]: rcvd [IPCP ConfNak id=0x1 <ms-dns1 10.11.12.13> <ms-dns3 10.11.12.14> <ms-wins 10.11.12.13> <ms-wins 10.11.12.14>]
Jan 1 00:01:07 (none) local2.debug pppd[1291]: sent [IPCP ConfReq id=0x2 <compress VJ 0f 01> <addr 0.0.0.0> <ms-dns1 10.11.12.13> <ms-dns3 10.11.12.14> <ms-wins 10.11.12.13> <ms-wins 10.11.12.14>]
Jan 1 00:01:10 (none) local2.debug pppd[1291]: sent [IPCP ConfReq id=0x2 <compress VJ 0f 01> <addr 0.0.0.0> <ms-dns1 10.11.12.13> <ms-dns3 10.11.12.14> <ms-wins 10.11.12.13> <ms-wins 10.11.12.14>]
Jan 1 00:01:13 (none) local2.debug pppd[1291]: sent [IPCP ConfReq id=0x2 <compress VJ 0f 01> <addr 0.0.0.0> <ms-dns1 10.11.12.13> <ms-dns3 10.11.12.14> <ms-wins 10.11.12.13> <ms-wins 10.11.12.14>]
Jan 1 00:01:16 (none) local2.debug pppd[1291]: sent [IPCP ConfReq id=0x2 <compress VJ 0f 01> <addr 0.0.0.0> <ms-dns1 10.11.12.13> <ms-dns3 10.11.12.14> <ms-wins 10.11.12.13> <ms-wins 10.11.12.14>]
Jan 1 00:01:19 (none) local2.debug pppd[1291]: sent [IPCP ConfReq id=0x2 <compress VJ 0f 01> <addr 0.0.0.0> <ms-dns1 10.11.12.13> <ms-dns3 10.11.12.14> <ms-wins 10.11.12.13> <ms-wins 10.11.12.14>]
Jan 1 00:01:22 (none) local2.debug pppd[1291]: sent [IPCP ConfReq id=0x2 <compress VJ 0f 01> <addr 0.0.0.0> <ms-dns1 10.11.12.13> <ms-dns3 10.11.12.14> <ms-wins 10.11.12.13> <ms-wins 10.11.12.14>]
Jan 1 00:01:25 (none) local2.debug pppd[1291]: sent [IPCP ConfReq id=0x2 <compress VJ 0f 01> <addr 0.0.0.0> <ms-dns1 10.11.12.13> <ms-dns3 10.11.12.14> <ms-wins 10.11.12.13> <ms-wins 10.11.12.14>]
Jan 1 00:01:28 (none) local2.debug pppd[1291]: sent [IPCP ConfReq id=0x2 <compress VJ 0f 01> <addr 0.0.0.0> <ms-dns1 10.11.12.13> <ms-dns3 10.11.12.14> <ms-wins 10.11.12.13> <ms-wins 10.11.12.14>]
Jan 1 00:01:31 (none) local2.debug pppd[1291]: sent [IPCP ConfReq id=0x2 <compress VJ 0f 01> <addr 0.0.0.0> <ms-dns1 10.11.12.13> <ms-dns3 10.11.12.14> <ms-wins 10.11.12.13> <ms-wins 10.11.12.14>]
Jan 1 00:01:34 (none) local2.debug pppd[1291]: sent [IPCP ConfReq id=0x2 <compress VJ 0f 01> <addr 0.0.0.0> <ms-dns1 10.11.12.13> <ms-dns3 10.11.12.14> <ms-wins 10.11.12.13> <ms-wins 10.11.12.14>]
Jan 1 00:01:37 (none) local2.warn pppd[1291]: IPCP: timeout sending Config-Requests
Jan 1 00:01:37 (none) local2.debug pppd[1291]: CCP: Down event in state 1!
Jan 1 00:01:37 (none) local2.debug pppd[1291]: sent [LCP TermReq id=0x2 "No network protocols running"]
Jan 1 00:01:40 (none) local2.debug pppd[1291]: sent [LCP TermReq id=0x3 "No network protocols running"]
Jan 1 00:01:43 (none) local2.notice pppd[1291]: Connection terminated.
Jan 1 00:01:43 (none) local2.info chat[1389]: abort on (BUSY)
Jan 1 00:01:43 (none) local2.info chat[1389]: abort on (NO DIALTONE)
Jan 1 00:01:43 (none) local2.info chat[1389]: abort on (ERROR)
Jan 1 00:01:43 (none) local2.info chat[1389]: send (\K^M)
Jan 1 00:01:43 (none) local2.info chat[1389]: send (+++ATH0^M)
Jan 1 00:01:43 (none) local2.info pppd[1291]: Serial link disconnected.
Jan 1 00:01:45 (none) local2.info pppd[1291]: Terminating on signal 15
Jan 1 00:01:45 (none) local2.notice pppd[1291]: Modem hangup
Jan 1 00:01:45 (none) local2.debug pppd[1291]: LCP: Down event in state 0!
Jan 1 00:01:45 (none) local2.info pppd[1291]: Exit.

Gibt man die selben Daten aus dem Manager direkt im Router Setup für 3G Verbindungen ein passiert folgendes:

Jan 1 00:00:00 (none) syslog.info syslogd started: BusyBox v1.11.1
Jan 1 00:01:03 (none) local2.notice pppd[1311]: pppd 2.4.4 started by root, uid 0
Jan 1 00:01:04 (none) local2.info chat[1314]: abort on (BUSY)
Jan 1 00:01:04 (none) local2.info chat[1314]: abort on (NO CARRIER)
Jan 1 00:01:04 (none) local2.info chat[1314]: abort on (ERROR)
Jan 1 00:01:04 (none) local2.info chat[1314]: report (CONNECT)
Jan 1 00:01:04 (none) local2.info chat[1314]: timeout set to 10 seconds
Jan 1 00:01:04 (none) local2.info chat[1314]: send (ATZ^M)
Jan 1 00:01:04 (none) local2.info chat[1314]: expect (OK)
Jan 1 00:01:04 (none) local2.info chat[1314]: ATZ^M^M
Jan 1 00:01:04 (none) local2.info chat[1314]: OK
Jan 1 00:01:04 (none) local2.info chat[1314]: -- got it
Jan 1 00:01:04 (none) local2.info chat[1314]: send (ATE1^M)
Jan 1 00:01:04 (none) local2.info chat[1314]: expect (OK)
Jan 1 00:01:04 (none) local2.info chat[1314]: ^M
Jan 1 00:01:04 (none) local2.info chat[1314]: ATE1^M^M
Jan 1 00:01:04 (none) local2.info chat[1314]: OK
Jan 1 00:01:04 (none) local2.info chat[1314]: -- got it
Jan 1 00:01:04 (none) local2.info chat[1314]: send (AT+CGDCONT=1,"PPP","internet.t-mobile","t-mobile,tm",0,0^M)
Jan 1 00:01:05 (none) local2.info chat[1314]: timeout set to 30 seconds
Jan 1 00:01:05 (none) local2.info chat[1314]: expect (OK)
Jan 1 00:01:05 (none) local2.info chat[1314]: ^M
Jan 1 00:01:05 (none) local2.info chat[1314]: AT+CGDCONT=1,"PPP","internet.t-mobile","t-mobile,tm",0,0^M^M
Jan 1 00:01:05 (none) local2.info chat[1314]: ERROR
Jan 1 00:01:05 (none) local2.info chat[1314]: -- failed
Jan 1 00:01:05 (none) local2.info chat[1314]: Failed (ERROR)

vielleicht weiß einer von euch Rat wie es doch noch klappt mit der Verbindung

re

Hallo,

Welcome in the forum!

Wir dein UMS Stick vom Edimax unterstützt?
-Hier- findest du in der Download Area eine Compability list!

Wird der UMTS Stick im Routermenü richtig erkannt?
Ist deine Routerfirmware aktuell?

Bye Chris

__________________
AVM 7270+, 7170 Gigabit NAS 1000GB Raid
Firm: Immer aktuell, DSL 16000 ohne Telekomiker

Kein ICQ, MSN Messenger, Facebook...

Dieser Beitrag wurde schon 1 mal editiert, zum letzten mal von Chris1 am 05.Sep.2009 10:32.

re

Es handelt sich um den Web n Walk Stick 4, also das E 176 von Huawei, das wird auch im Routermenü als solches erkannt, Firmware vom Router ist mittlerweile die allerneueste (v 2.10) und auch der stick ist auf die aktuellste gebracht worden (kein t-mobile branding mehr)

re

Hallo,

Wenn der Stick erkannt wird hast du evtl falsche Daten in die Routerkonfig eingegeben.
Schau mal -hier- sind diverse Einstellungen für den UMTS Zugang aufgeführt.

Bye Chris

__________________
AVM 7270+, 7170 Gigabit NAS 1000GB Raid
Firm: Immer aktuell, DSL 16000 ohne Telekomiker

Kein ICQ, MSN Messenger, Facebook...

verbindung

ne, daran kann es nicht liegen, über den manager nehm ich ja genau die selben daten...

Jan 1 00:01:06 (none) local2.warn pppd[1291]: kernel does not support PPP filtering

der fehler scheint eher hier zu liegen...